Building a new home, renovating your kitchen, adding a bedroom or upgrading your electrical installation? Your electrical system should support how you live, from everyday lighting and appliances to equipment you may install later.
Enovra Electricals provides residential electrical services in Mauritius for new houses and existing homes. As the electrical services division of Enovra Energy Solutions Ltd, a CIDB-registered company, we bring together trained electricians, electrical engineers and international expertise.
Whether you need new-house wiring, rewiring or electrical upgrades, we can help you plan the work around your property, priorities and longer-term energy needs.
Electrical Installation for New Houses in Mauritius
When you build a house, start electrical planning before workers close the walls and complete the finishes. Early decisions affect appliance placement, the convenience of each room and your ability to make changes later.
First, think about where you will place beds, a television and kitchen equipment. Then consider your home office, air conditioning, outdoor lighting, pumps and powered gates. This early planning helps establish suitable socket positions, lighting arrangements and cable routes.
For a new-house electrical installation, Enovra Electricals can discuss:
- House wiring and circuit planning around your layout and intended equipment.
- Lighting, switches and sockets for indoor and outdoor spaces.
- Distribution boards, electrical protection and earthing arrangements as part of the design.
- Power provision for appliances and equipment, including items that need dedicated circuits.
- Future provision for solar panels, battery storage and EV charging where appropriate.
For example, if you may buy an electric vehicle later, identifying a cable route to your parking area during construction can help avoid disturbing a finished driveway. However, the selected charger and available electrical supply will shape the final installation.
To begin, bring your house plans and tell us how you intend to use the property. This gives us a practical starting point for discussing the electrical scope.
Electrical Services for Existing Houses
Over time, your home’s electrical requirements can change. For example, a kitchen renovation may introduce additional appliances, an extension may need new lighting and sockets, and a former bedroom may become a home office.
In addition to new builds, Enovra Electricals works on existing houses. Depending on your requirements and the condition of the installation, the scope can include:
- Additional or relocated sockets, switches and lighting.
- Wiring for extensions and renovated rooms.
- Circuit upgrades for new equipment.
- Distribution board improvements.
- Partial rewiring or a more extensive house rewire.
First, we need to understand what you already have and what you want to change. An assessment can then identify the parts that can remain and the areas that need attention.
For an occupied home, planning must also consider access, power interruptions and the sequence of work. Therefore, discussing these details before work starts helps you understand how the project will affect your household.
Does Your House Need a Complete Rewire?
Not every existing house needs full rewiring. Instead, the appropriate scope depends on the installation’s condition and arrangement, together with the changes you plan.
Some projects need only a limited upgrade, whereas others need more extensive replacement. Therefore, the age of the property alone does not determine the answer.
Before you agree to house rewiring work, ask your contractor to clearly explain:
- What will be replaced.
- What will remain in use.
- Why the proposed work is needed.
- Which rooms and finishes will be affected.
- Whether restoring walls or finishes is included in the quotation.
As a result, you can better understand the recommendation and compare electrical quotations on the same basis.
Prepare Your Home for Solar, Batteries and EV Charging
Electrical work also gives you an opportunity to consider how your home may evolve.
For example, you may want solar panels in a few years, battery backup for selected equipment or an EV charger when you change your car. Even if these upgrades sit outside your current budget, discussing them during a new build or renovation can guide decisions about cable routes, equipment locations and circuit arrangements.
As part of Enovra Energy Solutions Ltd, Enovra Electricals can consider your household electrical requirements alongside your wider energy plans.
For example, you may want your fridge, selected lights and internet equipment included in future battery-backup planning. Identifying those priorities early helps inform the design. However, the chosen system and completed assessment will determine the equipment it can ultimately support.
You do not need to install everything at once. Instead, make informed decisions now while leaving suitable provision for the improvements you have in mind.
How Much Does House Wiring Cost in Mauritius?
The cost of electrical installation or house rewiring in Mauritius depends on the work’s scope. Because two houses of the same size can have different requirements, no single price applies to every property.
In particular, the following factors affect the cost:
- The number of electrical points: sockets, switches and lighting locations.
- Equipment requirements, including the appliances and other loads the installation must accommodate.
- Existing installation condition, including what can remain and what needs replacement.
- Distribution board and protection requirements, based on the upgrades identified during assessment.
- Access and cable routes, including the walls, ceilings and finishes the work may affect.
- Materials and fittings: the products selected for the project.
When comparing quotations, check whether each one includes materials, labor, testing, making good and applicable taxes. A clear scope, therefore, helps you understand the overall cost and reduces uncertainty about what the quotation includes.
To discuss a quotation with Enovra Electricals, share your location, house plans or relevant photos, a description of the work and your preferred time-frame. We can then review the information and discuss any site assessment you may need.
Why Choose Enovra Electricals?
Choosing an electrical contractor means choosing the team responsible for an essential part of your home.
Enovra Energy Solutions Ltd is CIDB registered. Through Enovra Electricals, we combine trained electricians and electrical engineers with international expertise and guidance.
Our approach considers three practical areas:
Your home today. First, the electrical work should reflect your layout, equipment and everyday use.
Your existing installation. For an existing house, we consider proposed changes alongside the condition and capacity of the current system.
Your plans for the future. Finally, we can discuss solar, batteries, EV charging and home extensions when we establish the scope.
Whether you are starting with architectural drawings or improving a home you already live in, Enovra Electricals can help you work through these requirements.
Frequently Asked Questions
Does Enovra Electricals work on both new and existing houses?
Yes. Enovra Electricals covers new-house electrical installations, as well as rewiring, renovations and electrical upgrades for existing homes.
When should I involve an electrical contractor in a new build?
Ideally, involve an electrical contractor during the planning stage, before you fix cable routes and finishes. In addition, house plans and details of your intended appliances help establish the electrical requirements.
Can I add sockets or upgrade one part of my house?
Yes, we can consider a limited scope. However, the existing installation and the proposed changes will determine whether the work can remain within that area.
Can electrical work be planned around future solar panels or an EV charger?
Yes. You can consider future provision during a new installation or renovation. However, your property, available supply and intended equipment will determine the appropriate arrangement.
What information should I provide for a quotation?
Share your location, whether the property is a new build or an existing home, the work you need and your preferred time-frame. In addition, plans, renovation drawings and relevant photos can help us understand the project.
Discuss Your Electrical Project With Enovra
Building a new house or upgrading an existing home in Mauritius? Speak to Enovra Electricals about your project.
Whether you need house wiring, rewiring, additional electrical points or provision for future energy systems, tell us what you are planning. We can then discuss the scope, any site assessment you may need and the next steps towards a quotation.
Enovra Electricals – a division of Enovra Energy Solutions Ltd, a CIDB-registered company.